Payment & Shipping Terms:
|Rating Voltage/frequency:||400VAC/50Hz, 3 Phase 4 Wire||Max Load Power:||1000 KW|
|Load Step:||1,2,2,5,10,20,20,50,100,200,200,200,200kW, Min Step Load: 1kW||Display Precision:||0.5 Class|
|Dimensions:||2400*1400*1680MM L×W×H||Weight:||About 1500kgs|
|Control Power:||380 VAC 50Hz||Ambient Temperature:||-10℃～+50℃|
Professional Produce 1000kw dummy load bank for testing generator
The system consists of 1 sets of AC400-1000KW load bank. The system is made up of two parts of measurement and control and load, mainly including the tank dry type ac load, automatic data acquisition system, automatically loading and unloading control system, the cooling device, auxiliary control, remote control box and PC software and so on.
|Rating Voltage/Frequency||400VAC/50Hz, 3 phase 4 wire|
|Rated Power||Resistive load:1000kW|
|Installed Capacity||Resistive load: 1000kW|
|Load Step||1,2,2,5,10,20,20,50,100,200,200,200,200kW min step load: 1kW|
|Load Tolerance (each step)||±5%|
|Display Precision||0.5 class|
|Control Power||380VAC 50Hz|
Load power supply input——Copper bar (star coupling “Y”)
|Way of Working||Continuous Working|
|Casing Dimensions and Cooling||about 2400*1400*1680mm(length*width*height) Forced air cooling,Horizontal inlet air and vertical cooling|
|Weight||About 1500 kgs / set|
|Transportation||Hoisting, there are lifting lug in top of casing, also the wheel casters can be provided|
|Casing Color||Grey(RAL7035)or as you required|
|Data processing software||Kaixiang(self-developed)|
System can work with PC software to realize intelligent operation, automatically finish the parameters testing, and create testing data table, curves and reports that can be printed, reduce a lot of manual operation.
1.Manufacturers of standby power generators commonly use load banks to test and tune newly assembled units
2.generator has been set up in a test cell within the factory, a test engineer uses the load bank to apply a discrete, selectable electrical load to the generator and measure the response stability and endurance.
3.During this process, the test engineer calibrates and adjusts the generator performance to ensure it meets the intended product specifications and tolerances.
Contact Person: Bruce